| Step-Saver Stair Lift
Standard Equipment and Specifications:
- Rigid and compact aluminum extrusion rail
- Support posts anchored to stair treads (Not mounted on wall)
- 300 lb (136 kg) capacity
- "Almond beige" seat and rail
- Adjustable width between armrests from 18" to 21" wide (457 to 533mm)
- 1/2 hp, 24 VDC motor
- Battery-powered 24-volt motor
- Pair of 12-volt, maintenance-free batteries
- Charger plugged in at top or bottom landing 110 VAC, 60 Hz outlet
- Electronic controller with soft start and soft stop
- Fused control circuit
- Wireless infrared call-send controls at both landings
- Continuous pressure buttons
- Aluminum rail on 6" (152 mm) from wall
- 3" (76 mm) rail overhang at top landing with seat height of 18" (457mm)
- 22 1/2" (572 mm) seat height at bottom landing
- Adjustable seat height
- Unit is completely reversible on site for quick installation
- Lateral adjustment on footrest for uneven treads
- Foldable footrest, seat and padded armrests
- Seat that swivels and locks in 45° and 90° positions both directions
- Seatbelt and seat swivel switch
- ABS plastic covers
- Obstacle sensors under footrest and on carriage
- Application - Indoor, Outdoor, straight run stairway
- Maximum Travel - 32 ft (9,754 mm)
- Speed - 20 fpm (0.1 m/s) approx.
- Angle of incline - 25º to 50º
- Rated load - 300 lbs (136 kg)
- Drive system - Rack and pinion
- Motor - ½ hp, 24 VDC. Charges on standard household current 120VAC, 50Hz at top or bottom landing
- Standard color - Beige carriage and upholstery, grey or beige rail finish
|
|
