Signet
Residential Elevator
(by TKAccess)

GENERAL SPECIFICATIONS Rated Load: 950 lbs. (430 kg) Also available with 700 and 750 lbs. Speed: 40 feet per minute (.20ms) Minimum pit depth: 6" Minimum overhead clearance: 9'0" (with optional hydraulic drive: 8'6") Maximum travel: 50' (with optional hydraulic drive: 40') Minimum travel between stops: 17" Maximum stops: 5 Limited two year warranty on parts Data plates and capacity tags Presentation drawings Pocket gate (not available with Type 5 car) MECHANICAL DATA Modular dual 6-1/4 lb. T-rail system Two #60 roller chains Sling assembly Counterweighted chain drive with frequency-controlled, variablespeed geared machine. Also available as hydraulic drive using pump assembly with submersed motor and 2-speed valve. CONTROLS Programmable Logic Controller (PLC) with Intel© digital signal processor Fully automatic operation Flush mounted operating panel Automatic car gate operator with light beam safety curtain Automatic car lighting with constant on switch Automatic homing to a predetermined floor Bi-directional leveling Emergency stop switch Emergency alarm button Hoistway wiring with conduit (hall stations/interlocks) Uninterruptible power supply UPS) for lowering and automatic gate operation in case of a power failure CAR SIZES 36" x 48" (12 sq ft) 36" x 60" (15 sq ft) 40" x 54" (15 sq ft) Inside car height: 84" (optional heights: 88"and 94") Custom sizes from 12-15 sq ft available. Please consult factory for more information. SAFETY SYSTEMS 115 VAC lockable auxiliary disconnect for car lighting circuit 230 VAC lockable auxiliary disconnect for drive unit circuit Upper and lower terminal limits Final limits (2 upper, 1 lower) Slack chain/rope safety Pit switch Car top stop switch Battery backup emergency light and alarm Car gate safety switch Electromechanical interlocks (for doors by others) ADDITIONAL OPTIONS Automatic hoistway door operator External modem for remote diagnostics Remote machine room elevator controller Installation/inspection pendant control Counterweight safety device Buffer springs (requires 12" deep pit minimum)

(Home Page) (About Us) (Products) (Questions & Facts) (Financial Assistance) (Contact Us-Email)

All Rights Reserved
Copyrighted 1997
Tri State Lift 8/9